Sample Coolers

Staitech HSC30, HSC50 and HSC60 sample coolers – designed and manufactured for steam condensing and water cooling applications in high purity environments.

The HSC range of sample coolers share an identical internal coil ensuring continuity of performance across the range. Features of the HSC range include:

316L stainless steel construction
Coils formed from electropolished tubing
Rated to 10 barg
Free draining designs
All wetted parts finished to 0.5 microns Ra
Fully passivated after manufacture
Connection options in BPE, DIN and ISO standards
Wide range of ancillary items available
EN 10204:2004 3.1 Full component traceability
FDA and USP Class VI compliant body seal

The HSC30 is a portable unit designed to allow samples to be taken quickly and safely at any point within a steam system. Cooling water connections are 3/4″ ASME BPE Clamp compatible, which enables the unit to be connected easily to a local water supply. The HSC30 is suitable for autoclaving.

Size Range	Sample medium – 1/2″ ASME BPE compliant clamp connections Cooling water – 3/4″ ASME BPE compliant clamp connections
Material	316L stainless steel
Options	Steam throttling valve HSV60 Sample outlet hose adaptor Steam and cooling water hoses Extended legs with floor pads Storage case
Literature	Data Sheet Installation & Maintenance

Designed for environments where the cooling water supply may lead to fouling the coil, the HSC50 can be disassembled for cleaning. The orientation of the sample connections also makes the HSC50 suitable for continuous in-line cooling applications such as conductivity monitoring in high purity systems.

Size Range	Sample medium – 1/2″ ASME BPE compliant clamp connections Cooling water – 3/4″ ASME BPE compliant clamp connections
Material	316L stainless steel
Options	Steam throttling valve HSV60 Sample outlet hose adaptor
Literature	Data Sheet

The HSC60 is intended for permanent mounting utilising the same basic coil design as the HSC30 and HSC50 units. The HSC60 rnage of sample coolers is ideal for obtaining samples at both the point of generation and throughout a distribution system. The HSC60 can be sterilised in-situ, thus ensuring continuity of samples regardless of testing frequency.

Size Range	Sample medium – 1/2″ ASME BPE compliant clamp connections Cooling water – Threaded 1/2″ BSP or 1/2″ NPT connections Clamp connections – 1/2″, 3/4″ or 1″ ASME BPE compliant clamp connections
Material	316L stainless steel
Options	Steam throttling valve HSV60 Sample outlet hose adaptor Wall mounting kit DIN & ISO connections
Literature	Data Sheet Installation & Maintenance

Sample Coolers

HSC30

HSC50

HSC60

Contact